Electronics Diagonal Cutters
Quantity
77 01 115
Technical Attributes
77 02 115
Technical Attributes
- Round head, with bevel
- Cutting edge hardness approx. 62 HRC
- For fine cutting work, e.g. in electronics and fine mechanics
- Load-optimised for a more direct feel when working
- Low-friction double spring for gentle and even opening
- The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 60 HRC
- Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger
Technical Attributes
| Article No. | 77 01 115 |
| EAN | 4003773018568 |
| Head | mirror polished |
| Handles | plastic coated |
| Weight | 50 g |
| Dimensions | 115 x 64 x 11 mm |
| Standard | DIN ISO 9654 |
| REACH compliant | does not contain SVHC |
| RoHS compliant | not applicable |
| Cutting capacities medium hard wire (diameter) | Ø 1.2 mm |
| Schneidwerte harter Draht (Durchmesser) | Ø 0.6 mm |
| Cutting capacities soft wire (diameter) | Ø 0.3 – 1.6 mm |
| Jaw length (B) | 14 mm |
| Jaw thickness (joint) (D) | 7.5 mm |
| Head width (A) | 11 mm |
77 02 115
- Round head, with small bevel
- Cutting edge hardness approx. 60 HRC
- For fine cutting work, e.g. in electronics and fine mechanics
- Load-optimised for a more direct feel when working
- Sturdy, zero-backlash box joint
- Low-friction double spring for gentle and even opening
- The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 60 HRC
- Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger
Technical Attributes
| Article No. | 77 02 115 |
| EAN | 4003773039334 |
| Head | mirror polished |
| Handles | with multi-component grips |
| Weight | 70 g |
| Dimensions | 115 x 70 x 17 mm |
| Standard | DIN ISO 9654 |
| REACH compliant | does not contain SVHC |
| RoHS compliant | not applicable |
| Cutting capacities medium hard wire (diameter) | Ø 1.2 mm |
| Schneidwerte harter Draht (Durchmesser) | Ø 0.6 mm |
| Cutting capacities soft wire (diameter) | Ø 0.3 – 1.6 mm |
| Jaw length (B) | 14 mm |
| Jaw thickness (joint) (D) | 7.5 mm |
| Head width (A) | 11 mm |
