Electronic Super Knips
Quantity
78 03 125
Technical Attributes
78 06 125
Technical Attributes
- Cutting edge hardness approx. 54 HRC
- INOX tool steel
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Ground, very sharp cutting edges without bevel
- Precisely shaped tips cut wires close to a surface from Ø 0.2 mm
- Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
- Joint with stainless steel rivet
- Extremely smooth movement for minimum operator fatigue
- With opening spring and opening limiter
Technical Attributes
| Article No. | 78 03 125 |
| EAN | 4003773035381 |
| Head | polished |
| Handles | with multi-component grips |
| Weight | 56 g |
| Dimensions | 125 x 65 x 13 mm |
| Standard | DIN ISO 9654 |
| REACH compliant | does not contain SVHC |
| RoHS compliant | not applicable |
| Cutting capacities medium hard wire (diameter) | Ø 1.0 mm |
| Cutting capacities soft wire (diameter) | Ø 0.2 - 1.6 mm |
| Jaw length (B) | 9 mm |
| Jaw thickness (joint) (D) | 7.5 mm |
| Head width (A) | 13.5 mm |
78 06 125
- VDE-tested precision pliers for ultra fine cutting work, e.g. in electronics and fine mechanics
- Complete your set of VDE-tools
- Ground, very sharp cutting edges without bevel
- Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
- Precisely shaped tips cut wires close to a surface from Ø 0.2 mm
- Joint with stainless steel rivet
- Extremely smooth movement for minimum operator fatigue
- With opening spring and opening limiter
- Cutting edge hardness approx. 54 HRC
Technical Attributes
| Article No. | 78 06 125 |
| EAN | 4003773084099 |
| Head | polished |
| Handles | insulated with multi-component grips, VDE-tested |
| Weight | 60 g |
| Dimensions | 125 x 78 x 18 mm |
| Standard | DIN ISO 9654 DIN EN 60900 IEC 60900 |
| REACH compliant | does not contain SVHC |
| RoHS compliant | not applicable |
| Cutting capacities medium hard wire (diameter) | Ø 1.0 mm |
| Cutting capacities soft wire (diameter) | Ø 0.2 – 1.6 mm |
| Jaw length (B) | 9 mm |
| Jaw thickness (joint) (D) | 7.5 mm |
| Head width (A) | 13.5 mm |
